February 1nd - 17th, 2018 - Overview of our work during the stay in Mexico
17.2.
Fuel Supply:
- Filled tank with 55 gal to around 50%
- Calibrated Fuel Level Gauge
- Marked Measuring Stick with level lines and compared it to Fuel Level Gauge
16.2. Fr
Fuel Supply:
- Compared and calibrated Fuel Level Gauge with existing Water Level Gauge
15.2.
- Fuel Supply: cleaned tank
- Mounted 2nd VHF Antenna
14.2.
- Fuel supply: adjusted inspection opening for Fuel Tank starboard side and fitted lid. Tank partially cleaned.
- Fuel Supply: drilled holes for Fuel Level Gauge and bolts into Fuel Tank starboard side
- Mounted 2nd Speaker in cockpit
13.2.
- Fuel Supply: drilled holes for inspection port and bolts into Fuel Tank starboard side
- Updated Chartplotter
- Repaired bad wire connection for Light Distribution in cockpit
12.2. Mo
- Mounted Ropecutter onto Shaft infront of Propeller with diving equipment
- Cleaned Hull and cleaned off a few Barnacles
11.2.
- Wired handheld radio charging station close to companion way
- Wired USB ports in owners cabin
- Fitted inside of nav table
10.2.
- Repaired Waterheater (broken fuse)
9.2. Fr
- Wired SSB Radio to Battery
- Took SSB into operation
- Shifted alternator
- Mounted ship bell in cockpit
8.2.
- Demounted alternator for shifting position and adapted mount
- Wired SSB Radio to Battery
7.2.
- Glued Dinghy transom to bottom
- Wired SSB Radio to Tuner in Lazarette
6.2.
- Mounted and wired SSB Tuner in Lazarette
- Preparation for Dinghy repair
5.2. Mo
- Outboarder break-in phase
